Floating AC/DC Low Voltage Power Supplies

FPS Series

 

As alternative to an HPS high voltage power supply with integrated filament supply the FPS series is a dedicated current supply for filaments, often used in electron beam applications (e.g. EBPVD). The main advantage is the possibility to combine with HPS high voltage power supplies, where the filament supply can be driven on high voltage potential from the HPS. Therefore the FPS has a HV input connector and an HV-filament output connector.

Key Features

  • dedicated fi lament supply unit for e-beam based coating applications
  • filament supply on HV potential via HV-in connector
  • USB, AIO, CAN, RS232, Ethernet interfaces
  • optional front panel operation with LCD
  • direct heating control or parent emission regulation

Device types and series / FPS Series

model FPS Image
Channels 1
Vnom 10V - 60V
Ripple & Noise 1· % Inom
HV Connector HV-CABLE, SHV
Interfaces USB CAN ETHERNET RS232 AIO
Options  
Manual see configurations
Datasheet download pdf 
 

*) Model overview is shown in the table below.


Models FPS (100W / 600W) 2U

Model Vnom   Inom   Pnom @iV HV con. case
FPd 010 060 010 10 V 60 A 600 W 10 kV HV-CABLE 2U
FPd 012 050 010 12 V 50 A 600 W 10 kV HV-CABLE 2U
FPd 030 020 010 30 V 20 A 600 W 10 kV HV-CABLE 2U
FPd 040 015 010 40 V 15 A 600 W 10 kV HV-CABLE 2U
FPd 060 010 010 60 V 10 A 600 W 10 kV HV-CABLE 2U
FPd 012 008 010  12.5 V 8 A 100 W 10 kV  HV-CABLE 2U
 
 

All FPS models:   positive polarity, 1 channel  


Power4Test GmbH
Grünwalder Weg 13a

82008 Unterhaching
Germany

T: +49-89-95890293

F: +49-89-95890295
E: [email protected]